MACHINERY
Lathes
Item \ Model | Vturn 26/60 | Vturn 26/85 | Vturn 26/110 | ||
---|---|---|---|---|---|
Standard turret | CV | Standard turret | |||
Capacity | Swing over bed | mm | 520 | 900 | 520 |
Swing over carriage | mm | 350 | 700 | 350 | |
Center distance | mm | 650 | 950 | 1130 | |
Max. turning diameter | mm | 380 | 351 | 380 | |
Std. Turning diameter | mm | 260 | 285 | 260 | |
Hole through draw bar | mm | 75 | 75 | 75 | |
Travel | Rapid feed rate-X | mm | 50+190 | 142.5+115.5 | 50+190 |
Rapid feed rate-Z | mm | 610 | 850 | 1090 | |
Rapid feed rate-B | mm | - | - | - | |
Spindle | Spindle speed | rpm/min | 3500 | 3500 | 3500 |
Spindle nose (chuck) | inch | A2-8 (10") | A2-8 (10") | A2-8 (10") | |
Spindle bore | mm | 75 | 86 | 75 | |
Bearing inside diameter | mm | 130 | 130 | 130 | |
Turret | No. of tools | no. | 10 | 12 | 10 |
Tool shank size | mm | 25 | 25 | 25 | |
Max. boring bar diameter | mm | 40 | 40 | 40 | |
Exchange time (T-T) | sec | 0.2 | 0.2 | 0.2 | |
Milling speed | rpm/min | - | 3000 | - | |
Tailstock | Quill diameter | mm | 110 | 100 | 110 |
Quill taper | MT# | MT#4 | MT#5 | MT#4 |
Milling machine
CNC Vertical centre Leadwell V- 40 L
+ 4th axis, GSA CNC-200L
Technical information | V-40L | |
---|---|---|
Rapid feed rate-X | mm | 1020 |
Rapid feed rate-Y | mm | 635 |
Rapid feed rate-Z | mm | 510+110/610 |
Distance from table(pallet) top to spindle end | mm | 100-710 |
Distance from column front to spindle center | mm | 635 |
Table | ||
Size of working surface | mm | 1120x610 |
Permissible mass of workpiece | kg | 800 |
Table working surface configuration | 18Tx100x6 | |
Height from floor to table top | mm | 950 |
Spindle | ISO 40 |